Dry Plate Collodion

Workshop Dry Plate Collodion & Salt Printing 07/09-03-14

Woehoew, last Friday was my Magic Friday! I left for Boerdonk early in the morning to arrive there at around 10 for the start of the dry plate collodion workshop given by Jeroen de Wijs together with Jetfire Jefferson. Three days of photographic history amazement and happiness. It all went by like it was nothing and it’s all sinking in now. It was a great couple of days, I learned a lot, had fun, drank lovely wine, enjoyed lovely food (thank you Ina & Wim!), saw a classical concert and even enjoyed a little bit of hotty sunshine. This summer will be dry plate time 🙂

P.s. Apologies for some unsharp images. I tried my best to hold still but I got all excited haha! This time the images are taken with a proper camera, not the iPhone, ha 🙂

Day 1: Preparing the plates
Some things are quite the same as with wet plate, some things are totally different. Cleaning the plates is where it starts, same story but I realise now more than ever that I can do a better job at that next time making plates 🙂

Nr4757_jeffersoncleaningplates_LR

After the cleaning part it’s time to steam the plate before coating it with a layer of albumen. This happens by heating water in a beaker and hoovering the plate above it (make sure the suction cup works!) so to get an even layer.

Nr4759_opdampenplaat_LR

Then it’s time to sub the plate with albumen (=1 egg white to 1 liter of distilled water). You do this by pouring the albumen over the plate as you would with collodion. This layer keeps the collodion layer stick to it when you arrive at the developing stage. The main compound of the developer is pyro and it makes the collodion layer shrink. With black glass ambrotypes you do not need to sub the plates as the iron sulphate based developer doesn’t have that specific characteristic. After pouring wipe the back of the plate carefully so no albumen residue is left; this will pollute the silver bath. After that the plates are left to dry.

Nr4761_gietenalbumine_LR

Nr4764_albumineafvegen_LR

Nr4767_drogenalbuminegecoateplaten_LR

As soon as the plates dried it’s time for the silver nitrate to come in. Standard bath you use with wet plate so that’s convenient. Filter and ready to use (I took this image as I found it a real handy way of filtering the bath into the box).

Nr4770_filterenzilvernitraat_LR

The dry plate process we did was the Tannic Acid Preserved Collodion Negative variant. Tannic Acid is the compound that keeps the pores of the collodion open so that when the plate gets developed later on the developer can reach the sensitive layer and actually develop the plate. With wet plate you have to develop etc. before the collodion dries out because when it does it closes its pores so that developer can’t penetrate the layer and no development is possible. Tannic Acid keeps that process from happening and enables the plate to dry and develop later on.

Nr4772_measuringtannine_LR

Nr4777_koffiefilteringtannine_LR

When the subbed plates have dried (depending on humidity and temperature this takes about an hour) you can pour the collodion on the plate. This is as with wet plate though now you use a negative collodion. After that the plate goes into the silver bath. The duration of the time in the silver bath is determined on inspection. When the silver nitrate leaves no streaky residue on the plate it’s good to come out. This can be within 2 minutes or after 5, depending on the age of the silver bath (the older the longer). After the sensitising the plate gets rinsed (in safelight of course). Then follows the tannin bath for the plate to go through. And then the plate is left to dry again, in the dark.

Day 2: Exposing and developing the plate
Wahhh the exciting time begins! Prepping the plate is not difficult, you just have to follow procedure, carefully that is with attention, and it should be fine. Exposing and developing is where the challenge begins! We head out to an abandoned house which looked really nice. We sat up the cameras, I used a 5×7″ camera from Jeroen. He made sure some street was in the shot, as well as greenery, the house and air. Proper ingredients to help determine developing.

Nr4787_exposure-LR

Nr4780_viewfinderimage_LR

Jeroen measured the light with a Minolta Autometer IV set at 100 asa and measured an EV of 13. According to his calibrations this should come at an exposure time of 8 minutes at f11. We made one plate like that, one at 4 minutes and one at 16 minutes. A bit boring to shoot three plates of exactly the same thing but all the more interesting and learnfull when developing the plates. After we got back we made the developer, actually 3 variants. One standard, one in case of overexposure and one in case of underexposure.

Nr4796_developers_LR

After the baths were ready I took the plate out of the back and placed it in a mixture of alcohol and distilled water. This bath is meant to open up the pores of the collodion / get the tannin out (alcohol is a solvent) so that the developer can get easier access. After that the plate gets rinsed a little until the alcohol is off it and then it’s ready for developing. We started with the standard developer and with each developer bit we used we added a little silver nitrate solution to it (the quantity depends on how much and how fast you want density to build and at what point). At around 5 minutes I checked the plate to see how far the image had developed. If nothing is there you move to the underexposure bath, if you can see a lot you move to the overexposure bath, and then whatever you feel like comes in between.

That’s where the fun tweaking and carefully observing part comes into play. I really liked doing this. It’s a matter of getting a hang of the developer as with the way you apply it on the plate can either speed up the developing or tame it a little. It’s good fun! I can’t explain how it all went down in detail, it’s far too complicated to write it down in just a few words. When the plate has gained the density and development you’re after it goes into a rinsing bath for 5 minutes.

Nr4799_rinsingoffalcoholwaterbeforedev_LR

Nr4804_developing_LR

Nr4809_checkingdensity_LR

After this exciting part has taken place the plate is being fixed in hypo and then being rinsed again for at least 20 minutes. Drying is the last thing it has to do before varnishing. Varnishing works the same as with wet plate so nothing new there. I did learn a better way of keeping the drip lines to a minimum so that’s good! Also, warming the varnish using a coffee warmer is also a very smart idea 🙂

Nr4810_warmingsandaraccoffeewarmer_LR

Nr4814_varnishing_LR

And when that is done, the negative is done! Ready for drooling all over 🙂 They invented a light tray for that. Also to properly judge the negative of course. With my 3 exposures you can see the overexposured negative to gain a reddish colour. The middle one at 8 minutes definitely printed the best the next day. The stereo negatives made by Mr. Jefferson looked wonderful too. The highlights look a little bit too washed out than they really are on these digital next two images btw.

Nr4831_negresults_LR

Nr4835_goodneg_LR

Day 3: Salt Printing
Yihaaa, another cool day! Or hot, better said cause Spring sure found her way to our Dutchie-land. The negatives had properly dried and were also waiting to become positive. We started with preparing the gelatine. Mixing it in water while heating it so it will dissolve properly. Once it did the salt (Ammonium Chloride) is added to the mix.

Nr4837_makinggelatine_LR

When it’s cooled a little it’s ready to be coated onto the paper. As far as coating techniques go, I won’t go into that now extensively. The method I discovered that day and preferred is applying the solution with a cotton pad to the paper.

Nr4841_gecoatpapier_LR

The paper is then dried with a hairdryer. Papers prepared like this will keep for years. When it’s dry it’s ready to be coated with a solution of silver nitrate (12% for more contrast, 15% for less). When doing this of course safe lights have to be used. After that the sheet is dried again and ready for exposure. This is best done with a contact printing frame. It makes sure the negative is firmly pressed to the paper, enables checking how the exposure is going etc. The weather was so good we enjoyed a nice cup of tea while exposing it in the sun/shade.

Nr4845_contactprinting_LR

Nr4847_contactproofing_LR

I didn’t count the time, why would I anyway, and when it was thought to be fine we went to the darkroom again to rinse and fix it, again in hypo. You can then choose to hypo clear and gold tone and rinse again, or use traditional toners before fixing. More on that later when I start using it more extensively. When drying the paper with heat it dries up more choclate-brownish than the images shown above.

Nr4852_rinsingsaltprintLR

When the print got dried it received a waxing. This gives the image a lovely sheen (saw some pretty ones by Julia Margaret Cameron at the Tefaf last year) and acts as a preservative. The wax is a mixture of bee wax and spike oil. The ratio depends on preference, for a more glossy finish use more spike oil. Make sure you attach the print firmly to an even surface like a table. Apply the mixture in strokes and then rub it in circular movements over the print. It smells wonderful and is nice way to end a print I must say. Much much better than selenium toner 😉

Nr4854_waxingsaltprint_LR

And that was kind of it… all that’s left is to digitise the print, which is quite hard really. I had to scan it as I had to bring back the camera to work and that just doesn’t do the image any justice. But…here it is; the result of 3 days hard work!

Nr645_saltprint_LR

Another smallish but handy thing I’ve learned is making four flaps yourself. This can be done really easily (shown on the photo is the really fast way) and it makes sure you have a perfect fit for your plate. I bought prepped ones but you can only get them in 4×5″ and 8×10″. Not for 18×24 or 4×10″ for example. I never thought of making them myself but will from now on!

Nr4850_cuttingflourflaps_LR

In short: I have learned a lot of practical things that you simply can’t learn from a book. I plan on using this process for making negatives of landscapes. Time and effort wise there’s no shorter choice but dry plate out in the field will definitely be a lot more comfortable and will get you to places where a mobile darkroom would be kind of an impossibility. After having seen this process I definitely want to grow bigger, 30×40 cm’s is what I have in mind, so that when contact printing them it will be of a nicer size than smaller (at least to me). I’ll first learn this process on the smaller sizes, get accustomed to it and its perks, and then grow. With salt printing there’s is some research to do on paper choice. I have some here from the Van Dyke story so will continue with that. All in all; woeh, quite wonderful!


2014: the Year of Dry Plate Collodion & Salt Prints :-)

I have finally planned a dry plate collodion workshop with Jeroen de Wijs, THE man if you really want to learn the collodion process (wet or dry) inside out. It’s a two-man-3-day-workshop which will take place the 2nd weekend of March. I am soooo looking forward! This means I can take plates with me when traveling by plane, or to places where a wet mobile darkroom on the spot isn’t too handy. And…learning how to make proper negatives AND learning how to print them using the Salt Printing process. At the TEFAF I’ve seen some awesome waxed salt prints from a/o Margaret Cameron.

Ohhh negatives ready for contact printing…the only debatable thing is the purchase of a 4×5″ Linhof for making negatives…4×5″ is really small for contact printing…I bought it so I could enlarge them but I also want to do contact printing processes…ahhh dilemma haha! Maybe, maybe when I get a hang of the process I’ll jump to a camera that makes 30×40 cm plates, imagine A3 negatives on glass…oeff…what’s that for p**n huh 😉

Anyway, first moving the entire darkroom which is a challenge on its own. I almost cleared out the DR by now, did a lot of work today. What’s not in boxes (and will not fit) are the big babies such as the wet table, cameras and enlargers. Can’t wait to build it up again, it’s gonna be fun redesigning!

So…just thought I’d share 🙂 :happybellydance: