So Fresh and so Clean Clean – Part 2
So…After the first experiment with polish-machine-style-plate-cleaning there’s always a second, with improvements of course. The first thing I wanted to solve was moving of the plate during polishing. This machine has a disc that rotates at 3200 times per minute = 53,33 times per second… Try that by hand 😆 This puts forth some power on the plate which makes it a little nervous on a flat surface. I already tried solving it by putting some gaffer tape on the table but that was not enough.
Now I decided to put some small boards on two sides of the table, pointing towards the corners thus each other, and letting them stick a little over the surface of the table so that a glass plate could be positioned alongside them. That way I could push the plate towards the corner without having it fall off. It worked a whole lot better but still the plate had the tendency to hoover a little over the table’s surface. Than Erik came along and made me a square wooden board on which he put a glass plate. He then put 4 long cocktail sticks along the plate sides and fixed them to the board with gaffer tape. That way the plate was sort of clamped in between the sticks and I could easily polish. I placed that board design along the smaller boards I earlier screwed into the sides of the table so it stayed put on the table and…Tadaaa, problem solved!
I then put the table in the middle of the darkroom and the second problem of spattering the cleaning substance all over the place also got solved. What a glorious evening 🙂 I was able to incredibly lazily clean the plates for a commissioned portrait shoot this Wednesday, awesome!